PORSCHE 911 TURBO AIR OI
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Car enthusiast will typically upgrade there vehicles performance piece by piece. Fabspeed has made it convenient for you and put together there fabspeed performance package for the Porsche 993 turbo turbo s GT2. The fabspeed performance package includes muffler, sportcats, headers, air intake, bmc filter and tips
Fabspeed performance package specs
Fits all 993tt vehicles 1995-1998
General Fitment 911 1994-98
$8,243.30
Make a selection
Product details:
Our direct replacement silicone boost hose kit will eliminate a common boost leakage failure problem on the 996 tt and especially modified high horsepower 996 tt cars.
Features:
-fits all Porsche 996 GT2 vehicles (2001-2005)
-on most all modified 996 tt the OEM boost hoses will leak and even blow out under acceleration leaving you with a loss in power and even stranded with a car that will not run.
-made out of high quality air craft quality silicone. Comes with cnc machined billet aluminum hose ends, shiny red or black are the color choices.
-successfully tested up to over +1000 hp twin turbos.
-guaranteed no...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Fabspeed's performance package is a complete high performance exhaust and intake solution for the 996 turbo; includes maxflo performance mufflers (includes sport catalytic converters), sport performance headers, deluxe x-50 style tips, and high performance air intake.
Features:
Increases horsepower and torque by 80 whp and 130 ft-lbs
General Fitment 911 TURBO/GT2 2001-05
$7,432.09
Make a selection
High performance dual-conical cold air intake with carbon fiber heat shield replaces the factory air box for improved cold air induction and increased power and sound
Features:
Fits all Porsche 997.2 turbo / turbo s vehicles (2010-2012)
Dual-conical air intake system is a direct replacement upgrade for the factory airbox
Significant horsepower and torque improvements
Includes dual dry-style air filters which do not require oiling; simply wash with warm water and reuse
Includes carbon fiber heat shield to prevent engine heat from entering intake
Simple bolt-on installation; no cutting or welding required
All fabspeed performance products are backed...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
From $895.00
Make a selection
Fabspeed's performance package for the Porsche 997 turbo offers massive increases in horsepower and torque by 74 whp and 78 ft-lbs of torque.
This is a complete high performance exhaust and intake solution that includes maxflo performance mufflers (includes sport catalytic converters), sport performance headers, deluxe quad style tips, and competition air intake.
Features:
Sound level: mild
General Fitment 911 TURBO/GT2 2007-09
$8,714.59
Make a selection
K24/26 race turbo (up to 700 hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,022.33
Make a selection
Rs-look air intake changeover kit for Porsche 964/965
-injection molding part in oem-quality
-established technics - new look
-easy and uncomplicated assembly
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94)
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1989-94
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
The intercooler cores used in this product are of the most advanced design currently produced anywhere in the world. These cores are manufactured by the aerospace company that is currently producing the majority of cooling for formula 1 cars and lead the way in automotive heat exchangers.
The plate and fin design that has been applied to these Porsche 997.1 turbo intercoolers has been designed to allow the minimum pressure drop while shifting the maximum amount of heat in to the received air flow.
Standard extruded tube intercoolers will give reasonable heat dissipation when the internal fin is packed on a vehicle of this power however this will always lead to a high pressure drop and as such not truly ai...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,354.70
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced
FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The remanufacturing process starts with re-profi...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,506.75
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software
FVD brombachers 996 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This is done to replace the factory compressor wheel with a larger, mo...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,686.76
Make a selection
K24 race turbo (up to 575hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24 race turbos are new units created for those who are looking for power that is focused in the mid and top rpm range. They are completely bolt on and do not require custom headers or special modifications.
The factory k24 OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This is done to replace the factory compressor wheel wit...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,022.03
Make a selection
K24/26 race turbo (up to 700 hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,022.33
Make a selection
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,860.38
Make a selection
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,531.31
Make a selection
FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $2,644.70
Make a selection
FVD Brombacher997.2 tt ?700 series? Upgraded turbos
Facts:
- modified compressor housing for the 3.8 l displacement
- modified & lightened billet compressor wheel with 12 blades
- 49.55 mm inducer
- 68 mm exducer
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for those already running FVD software
We start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,127.00
Make a selection
FVD diverter valve is a direct replacement for the OEM valve. Comes in black only, not blue.
Prevents boost leaks and "recovers" quicker for better boost and throttle response.
Why replace the OEM diverter valve with an "FVD diverter valve"?
Under higher boost pressures the Bosch valve can start to leak (plastic housing). The plastic cover begins to lift off the sealing face as the internal spring's resistance is exceeded. Our diverter valve is made out of aluminum.
Between shifts or sudden throttle lift-off the compressor wheel is still spinning very fast and pumping air at the closed throttle plate, as well as placing strain on the intercooler, hoses and fittings. The diverter valve keeps air f...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 1994-98 911 1989-94 911 1987-89 944 1985-88
K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: - modified compressor housing and backing plate - modified & lightened high flow compressor wheels. - remanufactured by kkk / borg warner certified technicians - free software update for those already running FVD software. FVD brombachers 996 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
From $2,217.60
Make a selection
By ordering this part number you get after previous sending in
Your wishbone overhauled with new race-silent blocs back.
The race-sÃlent blocs (85 shore) give you more stable driving.
Should it not be repairable, we will inform you immediately.
Fits: GT2 (96-98), turbo (95-98), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98)
General Fitment 911 1994-98
Sold as a set of (2)
Upgrade your soft rubber engine mounts with our solid engine mounts.
- precise shifting
- better throttle response
- cnc machined aluminum
- sold as a pair with all mounting hardware
- more responsive chassis
- made in Germany
Note:
You feel more vibration and hear more noise with solid mounts.
Fits: GT2 (96-98), turbo (95-98), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
From $418.70
Make a selection
997 GT3 rear spoiler fits all 997 (not turbo)
Includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass.
Also available with wing blade in kevlar / carbon FVD 512 997 GT3 rs2
Tech tip:
Facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 997 631 052 01 separately.
The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable.
The air inlet of the rear is not included. Please order 99751262591g2x
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 2009-12 911 2005-08
From $3,174.70
Make a selection
Lower rear diffuser for 997 turbo.
Accelerates the underbody airflow which sucks the car to the ground.
The additional air fins direct the flow of air, reduce turbulence and generate greater down force which stabilizes the car at high speed.
Constructed entirely of carbon fiber with a layer of high temperature insulation.
General Fitment 911 TURBO/GT2 2007-09
$3,710.00
Make a selection
Send us your instruments, we will convert
Them for you. We can upon request repair defective instruments of all models and calibrate them.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94)
General Fitment 911 1994-98 911 1989-94
Kit includes:
Sport-motronic dme exch., power-flow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in h...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|